Spoof wifi mac address windows 8

What is MAC Address and how do you change MAC Address in Windows 10/8/7? This post also touches upon MAC Address filtering, lookup.
Table of contents

Not all adapters can be changed this way. If you can't find either of these entries, you will need to use one of the other methods in this article. Enter your new MAC address. MAC addresses are digit values, and should be entered without any dashes or colons. Reboot your computer to enable the changes.

You can also disable and re-enable your adapter within Windows for the change to become effective without rebooting. Check that the changes took effect.

Technitium MAC Address Changer

It should be your new MAC address. Method 2. Find your network adapter's ID information.

Easy way to find MAC Address of Network Devices (Wi-Fi/ Bluetooth/ Ethernet) in Windows 8 1

In order to easily identify your network adapter in the Windows Registry, you'll want to gather some basic information about it through the Command Prompt. Note the Description and Physical Address for the active network device. Ignore devices that aren't active Media Disconnected. Type net config rdr and press Enter.

Additional menu

Open the Registry Editor. This will open the Registry Editor, which will allow you to change the settings for your network card. Making incorrect changes to the registry can cause your system to malfunction. Navigate to the registry key. Expand it by clicking the arrow. Find your adapter. There will be several folders labeled "", "", etc. Open each of these and compare the DriverDesc field to the Description you noted in the first step.

Right-click on the folder that matches your device. For example, if the "" folder matches your device, right-click on the folder. Name the new value "NetworkAddress". Double-click the new Network Address entry. In the "Value data" field, enter your new MAC address.

Ensure that the MAC address is formatted properly.

bbmpay.veritrans.co.id/mallorca-online-dating.php

Technitium MAC Address Changer

Some adapters especially Wi-Fi cards are unforgiving of MAC addresses changes if the first octet's 2nd half isn't a 2,6,A,E or begins with a zero. Should I do a system backup? There are many MAC addresses in the world, so the chances of having the same one on the same network are slim. Don't worry about it unless you have changed two devices to that MAC address. You don't have to do a backup because it's something that will reset if you delete the entry and then restart your computer. Yes No. Not Helpful 8 Helpful Allan Cramer.

No, the MAC address is unique to each device. I'm not even sure you can change Apple MAC addresses, but if you can, you'll have to do that with each one. Not Helpful 5 Helpful 8. If I delete the new registry entry I create, will the original Mac address be used again? No, the Mac address that you set is permanent and you'll have to do a hard reset to get the original address back. All MAC addresses are hard-coded into a network card and can never be changed. However, you can change or spoof the MAC address in the operating system itself using a few simple tricks.

So why would you want to change your MAC address? Well there are many reasons for this, mostly related to bypassing some kind of MAC address filter set on a modem, router or firewall.

3 Ways to Spoof a MAC Address

For example, a WiFi network may allow only authorized computers to connect to the network and filters out computers based on the MAC address. Another example is if you have an ISP that allows only a certain number of computers to connect to the Internet from your home.

Change a MAC Address in Windows

If you have more computers that need to connect, you can spoof the MAC address of an authorized computer and connect from a different computer. By default, the Not Present value is selected. Go ahead and click on the Value radio button and enter in a new MAC address. The MAC address is a combination of 6 pairs of numbers and characters, i. You should enter the MAC address without the dashes. Go ahead and restart the computer in order for the changes to take effect. This is the simplest way to change your MAC address in Windows.

Firstly, you have to use Terminal similar to command prompt in Windows to actually change the MAC address. Secondly, you need to manually figure out the technical name of the adapter before you can change the settings. You can do this in one of two ways: via System Preferences or via Terminal. This will give you the MAC address for the en0 interface.

Depending on how many interfaces you have on your computer, you might need to run this command several times adding 1 to the number each time. Now you can simply compare the MAC addresses listed here with the one you saw via System Preferences.